Hydrocarbon Processing
- Sour water
- Sulfuric acid
- Benzene
- Xylene
- Toluene
Upstream
- Produced water
- LACT
HMD Kontro GSP – General Service Petroleum API 685 OH2 Sealless Magnetic Drive Pump
Sealless magnetic drive pumps from HMD Kontro are specifically designed for the safe handling and processing of hazardous and valuable hydrocarbons and chemicals for refineries throughout the world.
The GSP magnetic drive pump is a heavy-duty centreline-mounted process pump complying with API 685 (API 610) refinery applications for sealless pumps. This product covers a hydraulic range split between 4 frame sizes, Frames 1, 2, 3 and 4.
A range of synchronous magnet drives is offered with the pump range, which are rated to match prime mover performance.
For high temperature operation, a corresponding range of torque ring drives is also available and prime mover specifications can be catered for.
Benefits of the HMD Kontro GSP Pump:
-
- Conforms to API 685 for sealless pumps and relevant API 610 requirements
- Options include casing drains flanges, jacketed pump casings and secondary containment
- Design ensures safe, leak-free operation
- Increased efficiency, low running costs
- Minimal maintenance and spares holding
- Increased efficiency and low running costs, maximising online process time
- No costly seal support systems to maintain
- Reduced installation costs
Frame I
| Flows to | 52 m³/hr (229 gpm) |
| Heads to | 60 m (196 ft) |
| Pressure | 40 bar / 580 psi |
| Temperature Range | -40 to 350°C (-40 to 660°F) |
Frame II
| Flows to | 405 m³/hr (1784 gpm) |
| Heads to | 138 m (452 ft) |
| Pressure | 40 bar / 580 psi |
| Temperature Range | -40 to 350°C (-40 to 660°F) |
Frame III
| Flows to | 570 m³/hr (2511 gpm) |
| Heads to | 210 m (689 ft) |
| Pressure | 40 bar / 580 psi |
| Temperature Range | -40 to 350°C (-40 to 660°F) |
Frame IV
| Flows to | 700 m³/hr (3084 gpm) |
| Heads to | 350 m (1148 ft) |
| Pressure | 40 bar / 580 psi |
| Temperature Range | -40 to 350°C (-40 to 660°F) |
GSP heavy-duty API sealless magnetic drive, end suction centrifugal pumps from HMD Kontro comply with all specifications required by the oil, gas, petroleum and heavy chemical industries. Typically, the GSP range of pumps is used in toxic, aggressive, hot, crystallising and high value processes.
Applications
keyboard_arrow_down keyboard_arrow_up|
|
Oil & Water Process Pumps
High Suction Pressure Pumps High Capacity, High Pressure Pumps Produced Water Start Up Pumps Oil Start Up Pumps Gylcol Dehydration Pumps Sampling Pumps |
Closed Drain Pumps Flare Knockout Pumps Seawater Cooling Pumps Booster Pumps Heat Transfer Fluid Pumps Condensate Pumps |
Benefits
keyboard_arrow_down keyboard_arrow_upOur pumps combine cutting-edge technology with over seventy years of expertise and experience to give you complete piece of mind.
Product Security – Magnetic drive sealless pumps are the safest and most robust means for liquid transfer. By eliminating the seal, the primary opportunities for leaks associated with traditional sealed pumps are completely removed.
Efficiency – By improving performance and reducing maintenance calls, sealless magnetic drive pumps can dramatically lower downtime and lost production. In sum, this equates to maximised efficiency that can be seen on your bottom line.
Reliability – Sealless magnetic drive pumps have proven their reliability in even the most severe climate conditions, from the frozen tundra of Siberia to the deserts of the Middle East and the humid climes of Louisiana’s refineries. In fact, there are HMD Kontro pumps that have been in operation for over 30 years and are still running today.
Safety – HMD Kontro sealless magnetic drive pumps are manufactured to conform to international design and safety standards, including ATEX, ISO, API and ANSI requirements. Plus, with no mechanical seals to leak hazardous chemicals, these pumps offer a clear choice for process industry professionals who regularly deal with volatile or high value materials.
Cost-effective – Sealless magnetic drive pumps require less monitoring and maintenance than traditional sealed designs, equating to substantial savings over the life of the pump.
Service – Global service centres keep HMD Kontro sealless magnetic drive pumps operating with peak performance. Standard pumps and parts are available from the factory and in the field.
Specifications
keyboard_arrow_down keyboard_arrow_upUS 60 Hz
| Heads to | 656 ft |
| Flows to | 2,558 gpm |
| Maximum Motor Power | 535 HP |
| Temperature Range | -40 to 660°F |
| Maximum Case Working Pressure | 580 psi |
| Hydrotest Pressure | 870 psi |
| Maximum Viscosity | 200 csT |
| Motor Details | Industry standard |
| Solids Range | Maximum of 5% w/w up to 150 microns |
| Mounting Configuration | Long coupled |
| Dimensional Standards | N/A |
| Number of Available Hydraulics | 26 |
| Available Flanges | ANSI 150lb/300lb RF |
Metric 50 Hz
| Heads to | 210 m |
| Flows to | 720 m3/hr |
| Maximum Motor Power | 400 kW |
| Temperature Range | -40 to 350°C |
| Maximum Case Working Pressure | 40 Bar |
| Hydrotest Pressure | 60 Bar |
| Maximum Viscosity | 200 csT |
| Motor Details | Industry Standard |
| Solids Range | Maximum of 5% w/w up to 150 microns |
| Mounting Configuration | Long coupled |
| Dimensional Standards | N/A |
| Number of Available Hydraulics | 26 |
| Available Flanges | ANSI 150lb/300lb RF |
Materials
keyboard_arrow_down keyboard_arrow_upStandard materials of construction
- A-8 and S-5 with silicon carbide internal bearings and spiral wound gaskets.
Other material options are available on request
- Duplex Stainless Steel
- Alloy 20 and Alloy C276
- Various flange options are available as standard
Performance
keyboard_arrow_down keyboard_arrow_up
HMD GSP Sealless Magnetic Drive Pump 60 Hz Performance Curve.
Power Monitor
keyboard_arrow_down keyboard_arrow_upPOWER MONITOR
Installed in the Motor Control Centre (MCC), a power monitor measures the power required to operate the pump. By setting High and Low trip points, the power monitor is the perfect solution for protecting your pump from:
- Dry running
- Low flow operation
- High flow operation
- Severe cavitation
- Magnet decoupling
New ZeroLoss™ Containment Shell
keyboard_arrow_down keyboard_arrow_upReduces Power Losses in the Pump to Zero
- Excellent energy savings can now be made thanks to the introduction of the ZeroLoss® containment shell for larger pumps. The elimination of eddy current losses can result in up to a 20% saving in power consumption, further enhancing the benefits and green credentials of magnetic drive technology from Sundyne HMD Kontro.
- The advantage increases in proportion with the magnetic coupling size and is particularly appropriate for larger pumps, making the magnetic drive option even more attractive because through life costs are reduced further. Lower power consumption not only results in reduced running costs but also potentially provides lower initial capital costs, as smaller motors can be specified.
- In addition, installation costs can be reduced as lower-rated cabling may be required, and there are space-savings from the ability to use a smaller base plate for the pump and motor combination.
VapourView® Ultrasonic Monitor
keyboard_arrow_down keyboard_arrow_up
A gas detection system designed to bolster the reliability and eliminate dry-running of HMD Kontro API-685 sealless magnetic drive pumps. This warning system mitigates costly pump component replacements and downtime that can result from dry running, entrainment or cavitation.
The VapourView® is powered by an industry standard 24 VDC supply and returns a 4-20 mA signal suitable for monitoring using a distributed control system (DCS). It features both light emitting diode (LED) and liquid crystal displays (LCD) to provide information on process fluid conditions inside of the pump to process engineers.
The VapourView® has been performance tested and is compliant with explosive atmosphere and electro-magnetic compatibility requirements. The VapourView® non-intrusive gas-in-liquid detector can be easily retrofitted into any HMD Kontro API 685 pump and will operate at temperatures between -40 and +350 degrees F (-40 and +180 degrees C).
SECONDARY CONTROL & CONTAINMENT
keyboard_arrow_down keyboard_arrow_upHMD Kontro sealless magnetic drive pumps are available with secondary control devices to restrict any leaks. Mechanical devices are fitted to the drive shaft assembly and are activated in the unlikely event of containment shell failure. The pump coupling housing is also fitted with gaskets to eliminate any leaks across the joining faces.
Solids Handling
keyboard_arrow_down keyboard_arrow_up
All HMD Kontro pumps, as standard, can handle up to 5% hard solids and 150 microns diameter. The solid size can increase to 8% solids and 250 microns by fitting a self-cleaning in line filter.
For larger solids, HMD Kontro can provide pumps with a clean flush system or filter built into the flush pipework.
Downloads
keyboard_arrow_down keyboard_arrow_up- GSP Range Brochure_A4_v2_050916
- GSP Frame I&II – UK
- Global Technical Services Brochure – UK
- Power Control Monitors A4
- Reliability Kit Leaflet – UK
- Spare Kit Leaflet – A4
- HMD Kontro Product Range Brochure_A4
- Oil & Gas Brochure – UK
- Brochure_Know_How_Guide_UK
- VapourView Brochure A4 012716 v2
- ZeroLoss Containment Shell Brochure_A4_071614
- HMD Kontro A Few Facts A4
- Glossary Of Terms
- How To Find Us
